• Dusting Regular dusting maintains the appearance of most blinds, shades and sheers. • Hand-Held Vacuuming For deeper cleaning, vacuum gently with the brush attachment of any vacuum.
• Compressed Air or Hair Dryer Use either compressed air or a hair dryer (set on the cool setting) to dust off selected window coverings.
• Spot Cleaning You can spot clean shades and blinds with a soft cloth or sponge moistened with water. Add mild detergent if it is needed and ensure that you blot gently to avoid creasing. Honeycomb shades should be dried in a fully lowered position. • Water Immersion Please consult the manufacturer’s product warranty details and care instructions
o Immerse entire shade assembly in lukewarm water mixed with mild detergent. Wash for approximately five minutes by gently moving the liquid around with your fingers. o Rinse the shade assembly with clear water. o Close the shade before removing from the rinsing water. o Hold the rails and tilt the shade to allow excess water to drain off of them. o Re-install the damp shade into the window opening. o Lower the shade all the way to allow it to dry completely.
o Immerse entire shade assembly in lukewarm water mixed with mild detergent. Wash for approximately five minutes by gently moving the liquid around with your fingers.
o Rinse the shade assembly with clear water.
o Close the shade before removing from the rinsing water.
o Hold the rails and tilt the shade to allow excess water to drain off of them.
o Re-install the damp shade into the window opening.
o Lower the shade all the way to allow it to dry completely.
• Ultrasonic Cleaning Professional ultrasonic cleaning is recommended for many products. • On-Site Injection/Extraction Cleaning This type of professional cleaning injects a cleaning solution into the fabric and extracts the dirty solution in the same motion. It is a very effective way to deep clean your Window Treatments. This service is usually performed on site so there is no need to remove the Window Treatments. • Steam Cleaning Steaming can be done to remove wrinkles from some fabrics. A handheld travel size steamer that provides continuous steam is best. Heavy duty steamers are not recommended.
• Faux Wood or Vinyl Products To reduce static cling and to help repel dust, wipe the product with dryer sheets. • Wood Products Clean using a dry and soft feather duster, clean cloth or dusting mitt. A vacuum with a soft brush attachment can also be used.
